Table of Contents
Advertisement
5-58
AP-51xx Access Point Product Reference Guide
Power Level
802.11 b/g mode
Set Rates
The
Power Level
parameter defines the transmit power of the
802.11a or 802.11b/g antenna(s). The values are expressed in dBm
and mW.
Specify
b
only,
g only
or
g radio transmits in the 2.4 Ghz band exclusively for 802.11b
(legacy) clients or transmits in the 2.4 Ghz band for 802.11g clients.
Selecting b and g enables the
and g clients if legacy clients (802.11b) partially comprise the
network. Select accordingly based on the MU requirements of the
network. This parameter does not apply to
radios.
Click the
Set Rates
button to display a window for selecting
minimum and maximum data transmit rates for the radio. At least
one
Basic Rate
must be selected as a minimum transmit rate
value.
Supported Rates
if a higher selected data rate cannot be maintained. Click
implement the selected rates and return to the 802.11a or
802.11b/g radio configuration screen. Clicking
Set Rates screen to the last saved configuration. Symbol
recommends using the default rates unless qualified to understand
the performance risks of changing them. The appearance of the Set
Rates screen varies depending on the 802.11a or 802.11b/g used,
as the dates rates available to the two radios are different.
b and g
to define whether the 802.11b/
access point
to transmit to both b
access point
define the data rate the radio defaults to
Cancel
802.11a
OK
to
reverts the
Advertisement
Table of Contents
