Configuring Manual Key Settings - Symbol AP-51xx Product Reference Manual

6-40 AP-51xx Access Point Product Reference Guide
IKE Settings
4. Click Apply
Key Settings, IKE Settings and Manual Key Settings screens. Navigating away from the
screen without clicking the Apply button results in all changes to the screens being lost.
5. Click Undo Changes
settings displayed on the VPN, Auto Key Settings, IKE Settings and Manual Key Settings
screens to the last saved configuration.
6. Click Logout
displays confirming the logout before the applet is closed.

6.11.1 Configuring Manual Key Settings

A transform set is a combination of security protocols and algorithms applied to IPSec protected
traffic. During security association (SA) negotiation, both gateways agree to use a particular
transform set to protect data flow.
A transform set specifies one or two IPSec security protocols (either AH, ESP, or both) and specifies
the algorithms to use for the selected security protocol. If you specify an ESP protocol in a transform
set, specify just an ESP encryption transform or both an ESP encryption transform and an ESP
authentication transform.
When the particular transform set is used during negotiations for IPSec SAs, the entire transform set
(the combination of protocols, algorithms, and other settings) must match a transform set at the
remote end of the gateway.
Use the Manual Key Settings
To configure manual key settings for the access point:
1. Select Network Configuration
2. Refer to the
click the Manual Key Settings
After selecting Auto (IKE) Key Exchange, click the
button to open a screen where IKE specific settings can be
configured. For more information, see
on page 6-46.
to save any changes to the
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the access point Symbol Access Point applet. A prompt
screen to specify the transform sets used for VPN access.
->
VPN Tunnel Config field, select the
button.
Configuring IKE Key Settings
VPN screen as well as changes made to the Auto
WAN -> VPN from the access point menu tree.
Manual Key Exchange
IKE Settings
radio button and