Viewing Wireless Statistics - Symbol AP-51xx Product Reference Manual

7-12 AP-51xx Access Point Product Reference Guide
Port ID
State
Path Cost
Designated Root
Designated Bridge
Designated Port
Designated Cost
4. Click the Logout
will be a prompt confirming logout before the applet is closed.

7.3 Viewing Wireless Statistics

Use the WLAN Statistics Summary
on the access point. The
Units (MUs) and total throughput for each of the active WLANs. The
basic throughput information for all RF activity on the access point. The WLAN Statistics Summary
screen is view-only with no user configurable data fields.
If a WLAN is not displayed within the
LANs (WLANs) on page 5-27
individual WLANs, see
Identifies the port from which the configuration message was sent.
Displays whether a bridge is forwarding traffic to other members
of the mesh network (over this port) or blocking traffic. Each viable
member of the mesh network must forward traffic to extent the
coverage area of the mesh network.
The root path cost is the distance (cost) from the sending bridge to
the root bridge.
Displays the MAC address of the access point defined with the
lowest priority within the Mesh STP Configuration screen.
There is only one root bridge within each mesh network. All other
bridges are designated bridges that look to the root bridge for
several mesh network timeout values. For information on root and
bridge designations, see
Networking Support on page
Each designated bridge must use a unique port. The value listed
represents the port used by each bridge listed within the table to
route traffic to other members of the mesh network.
Displays the unique distance between each access point MAC
address listed in the Designated Bridge column and the access
point MAC address listed in the Designated Root column.
button to securely exit the access point Symbol Access Point applet. There
screen to view overview statistics for active (enabled) WLANs
WLAN Summary field displays basic information such as number of Mobile
Wireless Statistics Summary
For information on configuring the properties of
to enable the WLAN.
Creating/Editing Individual WLANs on page
Setting the LAN Configuration for Mesh
9-6.
Total RF Traffic
screen,
5-29.
section displays
see Enabling Wireless