Viewing Radio Statistics - Symbol AP-51xx Product Reference Manual

7-20 AP-51xx Access Point Product Reference Guide
% NU
Retries
3. Click the Clear All Radio Stats
in order to begin new data collections.
Do not clear the radio stats if currently in an important data gathering activity or risk losing
all data calculations to that point.
For information on viewing radio statistics particular to the access point radio type displayed
within the AP Stats Summary screen, see
4. Click the

7.4.1 Viewing Radio Statistics

Refer to the Radio Stats
802.11a or 802.11b/g) displayed within the Radio Summary screen. There are four fields within the
screen. The Information
and power information. The
received and transmitted. The Traffic field does not add retry information to the stats displayed. Refer
to the RF Status field for an average MU signal, noise and signal to noise ratio information. Finally,
the Errors field displays retry information as well as data transmissions the access point radio either
dropped or could not decrypt. The information within the 802.11a Radio Statistics screen is view-only
with no configurable data fields.
To view detailed radio statistics:
1. Select Status and Statistics
point menu tree.
Displays the percentage of the total packets that are non-unicast.
Non-unicast packets include broadcast and multicast packets.
Displays the average number of retries per packet on each radio. A
high number could indicate network or hardware problems.
Logout button to securely exit the access point Symbol Access Point applet.
screen to view detailed information for the access point radio (either
field displays device address and location information, as well as channel
Traffic field displays statistics for cumulative packets, bytes, and errors
->
button to reset each of the data collection counters to zero
Viewing Radio Statistics on page
Radio Stats -> Radio1(802.11b/g) Stats
7-20.
from the access