AP51xx>admin(stats)> flash-all-leds
Description:
Starts and stops the illumination of a specified access point's LEDs.
Syntax:
flash-all-leds
<index>
<stop/start>
Example:
admin(stats)>
admin(stats)>flash-all-leds 1 start
Password ********
admin(stats)>flash-all-leds 1 stop
admin(stats)>
For information on flashing access point LEDs using the applet (GUI), see
Defines the Known AP index number of the target AP to flash.
Begins or terminates the flash activity.
Viewing Known Access Point Statistics on page
Command Line Interface Reference 8-197
7-33.