Table of Contents
Advertisement
SNMP v1/v2c community definitions allow read-only or read/write access to access point
management information. The SNMP community includes users whose IP addresses are
specified on the
SNMP Access Control
A read-only community string allows a remote device to retrieve information, while a read/
write community string allows a remote device to modify settings. Symbol recommends
considering adding a community definition using a site-appropriate name and access level.
Set up a read/write definition (at a minimum) to facilitate full access by the access point
administrator.
2. Configure the
SNMP v1/v2 Configuration
community definitions, name the community, specify the OID and define community access.
Add
Delete
screen.
field (if SNMP v1/v2 is used) to add or delete
Click
Add
to create a new SNMP v1/v2c community definition.
Select
Delete
to remove a SNMP v1/v2c community definition.
4-23
System Configuration
Advertisement
Table of Contents
