Table of Contents
Advertisement
5. Enter the WAN port IP address of AP #1 for the
6. Within the
Remote Subnet
mask of AP #2 /Device #2.
7. Enter the WAN port IP address of AP #2/ Device #2 for a
8. Click
Apply
to save the changes.
NOTE For this example, Auto IKE Key Exchange is used. Any key exchange can
be used, depending on the security needed, as long as both devices on
each end of the tunnel are configured exactly the same.
9. Select the
Auto (IKE) Key Exchange
10. Select the
Auto Key Settings
11. For the ESP Type, select
Encryption Algorithm. Click OK.
12. Select the
IKE Settings
Local WAN
and
Remote Subnet Mask
radio button.
button.
ESP with Authentication
button.
IP.
fields, enter the LAN IP subnet and
Remote
Gateway.
and use
AES 128-bit
as the ESP
B-11
Usage Scenarios
Advertisement
Table of Contents
