Table of Contents
Advertisement
LAN Interface
IP Address
Network Mask
Ethernet Address
WLANs Connected
3. Refer to the
Received
RX Packets
RX Bytes
RX Errors
RX Dropped
Displays whether this particular LAN has been enabled as viable
subnet from within the LAN Configuration screen.
The Internet Protocol (IP) addresses for the
The first two sets of numbers specify the network domain, the next
set specifies the subset of hosts within a larger network. These
values help divide a network into subnetworks and simplify routing
and data transmission.
The Media Access Control (MAC) address of the
MAC address is hard coded at the factory and cannot be changed.
For more information on how access point MAC addresses are
assigned, see
AP-51xx MAC Address Assignment on page
WLANs Connected
The
(Either LAN1 or LAN2) as their LAN interface.
field to view data received over the access point LAN port.
RX packets are data packets received over the
port. The number is a cumulative total since the LAN connection
access point
was last enabled or the
a new data collection, see
2.
RX bytes are bytes of information received over the LAN port. The
value is a cumulative total since the LAN connection was last
access point
enabled or the
data collection, see
Configuring System Settings on page
RX errors include dropped data packets, buffer overruns, and frame
errors on inbound traffic. The number of RX errors is a total of RX
Dropped, RX Overruns and RX Carrier errors. Use this information
to determine performance quality of the current LAN connection.
The
RX Dropped
field displays the number of data packets failing
to reach the LAN port. If this number appears excessive, consider a
new connection to the device.
access point
access point
table lists the WLANs using this LAN
access point
was last restarted. To begin
Configuring System Settings on page 4-
was last restarted. To begin a new
7-7
Monitoring Statistics
LAN port.
. The
1-24.
LAN
4-2.
Advertisement
Table of Contents
