Network Wan Nat Commands - Symbol AP-51xx Product Reference Manual

8.3.2.1 Network WAN NAT Commands

AP51xx>admin(network.wan.nat)>
Description:
Displays the NAT submenu. The items available under this command are shown below.
show Displays the access point's current NAT parameters for the specified index.
set Defines the access point NAT settings.
add Adds NAT entries.
delete Deletes NAT entries.
list Lists NAT entries.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
For an overview of the NAT configuration options available using the applet (GUI), see
Configuring Network Address Translation (NAT) Settings on page 5-21.
Command Line Interface Reference 8-43