Symbol AP-51xx Product Reference Manual page 556

9-22 AP-51xx Access Point Product Reference Guide
3. The Trion IT department selects
tree.
4. The Trion IT department verifies the LAN used to support the mesh network is enabled for
both AP1 and AP2, (by selecting the
NOTE In this fictional mesh network deployment for Trion Enterprises, AP1 and
5. The Trion IT department then selects
AP-5131 menu tree.
Network Configuration -> LAN
Enable
AP2 should both have the access point's Ethernet Port mapped to the
mesh LAN. However, there are some scenarios when this is not necessary.
For example, when the Ethernet is not connected, or is being used for
some other purpose such as routing traffic to the WAN connection.
Network Configuration -> LAN -> trion
from the AP-5131 menu
checkbox).
from the