Table of Contents
Advertisement
2. Refer to the
Information
Status
HW Address
IP Addresses
field to reference the following access point WAN data:
The
Status
field displays
Enabled
on the
WAN
screen. If the WAN interface is disabled on the WAN
screen, the WAN Stats screen displays no connection information
and statistics. To enable the WAN connection, see
WAN Settings on page 5-16
The Media Access Control (MAC) address of the
WAN port. The WAN port MAC address is hard coded at the factory
and cannot be changed. For more information on how access point
MAC addresses are assigned, see
Assignment on page
1-24.
The displayed Internet Protocol (IP) addresses for the
WAN port.
Monitoring Statistics
if the WAN interface is enabled
Configuring
access point
AP-51xx MAC Address
access point
7-3
Advertisement
Table of Contents
