Symbol AP-51xx Product Reference Manual page 221

Table of Contents

Advertisement

Remember, multiple WLANs can share the same security policy, so be careful not to name
security policies after specific WLANs or risk defining a WLAN to single policy. Symbol
recommends naming the policy after the attributes of the authentication or encryption type
selected (for example, WPA2 Allow TKIP).
4. Enable and configure an
Manually Pre-Shared
Key / No
Authentication
Kerberos
802.1x EAP
5. Enable and configure an
No Encryption
WEP 64 (40-bit key)
WEP 128 (104-bit key) Select the
KeyGuard
Authentication
option if necessary for the target security policy.
Select this button to disable authentication. This is the default
value for the
Authentication
Select the
Kerberos
button to display the
Configuration
field within the New Security Policy screen. For
specific information on configuring Kerberos, see
Configuring Kerberos Authentication on page
Select the
802.1x EAP
button to display the
field within the New Security Policy screen. For specific
information on configuring EAP, see
Configuring 802.1x EAP Authentication on page
Encryption
option if necessary for the target security policy.
If
No Encryption
is selected, encryption is disabled for the
security policy. If security is not an issue, this setting avoids the
overhead an encryption protocol causes on the
Encryption is the default value for the Encryption field.
Select the
WEP 64 (40 bit key)
Settings
field within the New Security Policy screen. For specific
information on configuring WEP 64, see
Configuring WEP Encryption on page
WEP 128 (104 bit key)
Settings
field within the New Security Policy screen. For specific
information on configuring WEP 128, see
Configuring WEP Encryption on page
Select the
KeyGuard
button to display the
field within the New Security Policy screen. For specific
information on configuring KeyGuard, see
Configuring KeyGuard Encryption on page
Configuring Access Point Security
field.
Kerberos
6-8.
802.1x EAP Settings
6-11.
access point
button to display the
WEP 64
6-16.
button to display the
6-16.
KeyGuard Settings
6-18.
6-7
. No
WEP 128

Advertisement

Table of Contents
loading

Table of Contents