Table of Contents
Advertisement
NAT Type
Outbound Mappings
Inbound Mappings
Port Forwarding
3. Click
Apply
to save any changes to the NAT screen. Navigating away from the screen
without clicking the Apply button results in all changes to the screens being lost.
4. Click
Undo Changes
settings displayed on the NAT screen to the last saved configuration.
5. Click
Logout
to securely exit the access point Symbol Access Point applet. A prompt
displays confirming the logout before the applet is closed.
Specify the NAT Type as
1 to 1
host (local) IP address. 1 to 1 mapping is useful when users need
dedicated addresses, and for public-facing servers connected to
access point
the
.
Set the NAT Type as
1 to Many
multiple local IP addresses. This displays the 1 to Many Mappings
button in the adjacent Outbound Mappings field. This button
displays a screen for mapping the LAN IP addresses that are
associated with each subnet.
Define the NAT Type as
none
on the internal network.
When
1 to 1
NAT is selected, a single IP address can be entered in
the
Outbound Mappings
mapping of the WAN IP address to the specified IP address.
When
1 to Many
is selected as the NAT Type, the Outbound
Mappings area displays a
button to select the LAN1 or LAN2 IP address used to set the
outbound IP address or select
If
none
is selected as the NAT Type, The Outbound Mappings area
is blank.
When
1 to 1
or
1 to Many
option displays a
Port Forwarding
Click the
Port Forwarding
forwarding parameters for inbound traffic from the associated
WAN IP address. for information on configuring port forwarding,
see
Configuring Port Forwarding on page
(if necessary) to undo any changes made. Undo Changes reverts the
to map a WAN IP address to a single
to map a WAN IP address to
when routable IP addresses are used
area. This address provides a 1 to 1
1 to Many Mappings
button. Click the
none
to exclude the IP address.
is selected, the
Inbound Mappings
button.
button to display a screen of port
5-24.
5-23
Network Management
Advertisement
Table of Contents
