Symbol AP-51xx Product Reference Manual page 371

AP51xx>admin(network.wan.nat)> set
Description:
Sets NAT inbound and outbound parameters.
Syntax:
set type <index>
ip <index>
inb enable/disable
outb <ip>
mode <index>
unspec-ip <index>
Example:
admin(network.wan.nat)>set type 1-to-many
admin(network.wan.nat)>set ip 157.235.91.2
admin(network.wan.nat)>set mode 2 disable
admin(network.wan.nat)>set unspec-ip 2 111.223.222.1
admin(network.wan.nat)>show 2
WAN IP Mode
WAN IP Address
NAT Type
One to many nat mapping
Inbound Mappings
unspecified port forwarding mode
unspecified port fwd. ip address
For an overview of the NAT options available using the applet (GUI), see
page 5-21.
<type> Sets the type of NAT translation for WAN address index <idx> (1-8) to
<type> (none, 1-to-1, or 1-to-many).
<ip> Sets NAT IP mapping associated with WAN address <idx> to the
specified IP address <ip>.
<ip> Sets inbound NAT parameters.
<map> Sets outbound NAT parameters.
enable/disable Enable or disable the Unspecified Port Forwarding mode for the
designated NAT index.
<ip> Forward unspecified ports for the defined NAT index to the defined IP
address.
: disable
: 157.235.91.2
: 1-to-many
: LAN1 LAN2
: Port Forwarding
: enable
: 111.223.222.1
Configuring Network Address Translation (NAT) Settings on
Command Line Interface Reference 8-45