Ap-5181 Wall Mounted Installations - Symbol AP-51xx Product Reference Manual

The AP-5181 is ready to configure. For information on an AP-5181 default configuration, see
Getting Started on page
System Configuration on page
NOTE If installing the AP-5181 in an outdoor area prone to high winds and rain,

2.9.2 AP-5181 Wall Mounted Installations

Complete the following steps to mount the AP-5181 to a wall using the supplied wall-mounting
bracket:
1. Attach the bracket to a wall with flat side flush against the wall (see the illustration below).
Position the bracket in the intended location and mark the positions of the four mounting
screw holes.
2. Drill four holes in the wall that match the screws and wall plugs.
3. Secure the bracket to the wall.
3-1. For specific details on AP-5131 system configurations, see
4-1.
Symbol recommends using the AP-5181 Heavy Weather Kit (Part No.
KT-5181-HW-01R). This kit shields an AP-5181 from high winds and water
damage as a result of driving rain.
2-27
Hardware Installation