8.3.1.1 Network LAN, Bridge Commands
AP51xx>admin(network.lan.bridge)>
Description:
Displays the access point Bridge submenu.
show
Displays the mesh configuration parameters for the access point's LANs.
set
Sets the mesh configuration parameters for the access point's LANs..
..
Moves to the parent menu.
/
Goes to the root menu.
save
Saves the configuration to system flash.
quit
Quits the CLI and exits the session.
For an overview of the access point's mesh networking options using the applet (GUI), see
Command Line Interface Reference 8-17
Configuring Mesh Networking on page
9-1.