Table of Contents
Advertisement
5. The Trion IT department then selects
AP-5131 menu tree.
6. The IT team selects the
7. The Trion IT department adjusts the
to defer to AP1 (which was assigned a priority of 10000) as the access point defining the
mesh network configuration.
The remainder of the Mesh STP Configuration settings are left unchanged from their default
values. The team clicks
within the trion (LAN1) screen to save the settings.
The Trion IT team now intends to assign WLANs (to use with the trion LAN) that can be
dedicated to their mesh network within the shipping yard.
8. The team selects
Network Configuration -> Wireless
The
Wireless Configuration
the table. Since this is Trion's first deployment for AP3 and AP4, the IT department
determines the existing default WLAN should be left as is, and a new WLAN should be
configured closely resembling the mesh network WLAN defined for AP1 and AP2.
Network Configuration -> LAN -> trion
Mesh STP Configuration
Priority
setting to at 15000 for AP3 and 16000 for AP4
OK
from within the Mesh STP Configuration screen and
screen displays with those existing WLANs displayed within
Configuring Mesh Networking
button on the bottom of the screen.
from the AP-5131 menu tree.
9-33
from the
Apply
from
Advertisement
Table of Contents
