Table of Contents
Advertisement
Command Line Interface Reference 8-191
AP51xx>admin(system.fw-update)>update
Description:
Executes the access point firmware update over the WAN or LAN port using either ftp or tftp.
Syntax:
update
<mode><iface> Defines the ftp ot tftp mode used to conduct the firmware update. Specifies whether the
update is executed over the access point's WAN, LAN1 or LAN2 interface <iface>.
NOTE The access point must complete the reboot process to successfully update the device firmware,
regardless of whether the reboot is conducted uing the GUI or CLI interfaces.
For information on updating access point device firmware using the applet (GUI), see
Updating Device Firmware on page
4-46.
Advertisement
Table of Contents
