Table of Contents
Advertisement
8-2
AP-51xx Access Point Product Reference Guide
5. Enter the default username of
point, you are unable to access any of the access point's commands until the country code is set. A new password will also
need to be created.
8.1.2 Accessing the CLI via Telnet
To connect to the access point CLI through a Telnet connection:
1. If this is your first time connecting to your access point, keep in mind the access point uses a static IP WAN address
(10.1.1.1). Additionally, the access point's LAN port is set as a DHCP client.
2. Enter the default username of
point, you are unable to access any of the access point's commands until the country code is set. A new password will also
need to be created.
admin
and the default password of symbol. If this is your first time logging into the access
admin
and the default password of symbol. If this is your first time logging into the access
Advertisement
Table of Contents
