Symbol AP-51xx Product Reference Manual page 429

Table of Contents

Advertisement

AP51xx>admin(network.wireless.radio.802-11a)> set
Description:
Defines specific 802.11a radio parameters.
Syntax:
set placement
Defines the access point radio placement as indoors or outdoors.
ch-mode
Determines how the radio channel is selected.
channel
Defines the actual channel used by the radio.
antenna
Sets the radio antenna power.
power
Defines the radio antenna power transmit level.
rates
Sets the supported radio transmit rates.
beacon
Sets the beacon interval used by the radio.
dtim
Defines the DTIM interval (by index) used by the radio.
rts
Defines the RTS Threshold value for the radio.
qos
Defines the cwmin, cwmax, aifsn and txops levels for the QoS policy used for the radio.
qos param-set
Defines the data type proliferating the WLAN used with the mesh network. When set to a
value other then manual, editing the access category values is not necessary. Options
include; 11g-default, 11b-default, 11g-wifi, 11b-wifi, 11g-voice, 11b-voice or manual (for
advanced users).
Example:
admin(network.wireless.radio.802-11a)>
admin(network.wireless.radio.802-11a)>set placement indoor
admin(network.wireless.radio.802-11a)>set ch-mode user
admin(network.wireless.radio.802-11a)>set channel 1
admin(network.wireless.radio.802-11a)>set antenna full
admin(network.wireless.radio.802-11a)>set power 4
admin(network.wireless.radio.802-11a)>set rates
admin(network.wireless.radio.802-11a)>set beacon 100
admin(network.wireless.radio.802-11a)>set dtim 1 10
admin(network.wireless.radio.802-11a)>set rts 2341
admin(network.wireless.radio.802-11a)>set qos cwmin 125
admin(network.wireless.radio.802-11a)>set qos cwmax 255
admin(network.wireless.radio.802-11a)>set qos aifsn 7
admin(network.wireless.radio.802-11a)>set qos txops 0
admin(network.wireless.radio.802-11bg)>set qos param-set 11a-default
For information on configuring the Radio 2 Configuration options available to the access point using the applet (GUI), see
Configuring the 802.11a or 802.11b/g Radio on page
5-55.
Command Line Interface Reference 8-103

Advertisement

Table of Contents
loading

Table of Contents