Table of Contents
Advertisement
2. Use the access point
access point's LAN1, LAN2 or WAN interfaces:
Applet HTTP (port 80) Select the LAN1, LAN2 and/or WAN checkboxes to enable access
Applet HTTPS (port
443)
CLI TELNET (port 23)
CLI SSH (port 22)
SNMP (port 161)
Access
field checkboxes to enable/disable the following on the
access point
to the
configuration applet using a Web browser.
Select the LAN1, LAN2 and/or WAN checkboxes to enable access
access point
to the
configuration applet using a Secure Sockets
Layer (SSL) for encrypted HTTP sessions.
Select the LAN1, LAN2 and/or WAN checkboxes to enable access
access point
to the
CLI via the TELNET terminal emulation TCP/IP
protocol.
Select the LAN1, LAN2 and/or WAN checkboxes to enable access
access point
to the
CLI using the SSH (Secure Shell) protocol.
Select the LAN1, LAN2 and/or WAN checkboxes to enable access
access point
to the
configuration settings from an SNMP-capable
client.
4-7
System Configuration
Advertisement
Table of Contents
