Table of Contents
Advertisement
Select this button to enable BOOTP to set
This interface is a
address information via this LAN1 or LAN2 connection.
BOOTP Client
When selected, only BOOTP responses are accepted by the
point
BOOTP Client.
This interface uses
Select the
static IP Address
manually enter static network address information in the areas
provided.
This interface is a
The
DHCP Server
over the LAN1 or LAN2 connection. Select the
DHCP Server
information in the areas provided.
Address Assignment
Use the address assignment parameter to specify a range of
numerical (non DNS name)
Range
client MAC addresses to IP addresses. If a manually (static)
mapped IP address is within the IP address range specified, that IP
address could still be assigned to another client. To avoid this,
ensure all statically mapped IP addresses are outside of the IP
address range assigned to the DHCP server.
Advanced DHCP
Click the
Server
for generating a list of static MAC to IP address mappings for
reserved clients. A separate screen exists for each of the LANs. For
more information, see
on page
IP Address
The network-assigned
the
Network Mask
The first two sets of numbers specify the network domain, the next
set specifies the subset of hosts within a larger network. These
values help divide a network into subnetworks and simplify routing
and data transmission. The subnet mask defines the size of the
subnet.
Default Gateway
The
DNS name)
Ethernet as its default gateway.
Domain Name
Enter the name assigned to the primary DNS server.
Primary DNS Server
Enter the Primary DNS
. If both DHCP and BOOTP services are required, do not select
This interface uses static IP Address
access point
can be configured to function as a DHCP server
button and manually enter static network address
Advanced DHCP Server
Configuring Advanced DHCP Server Settings
5-12.
numerical (non DNS name) I
access point
.
Default Gateway
parameter defines the
IP address of a router the
numerical (non DNS name)
Network Management
access point
button, and
This interface is a
IP addresses reserved for mapping
button to display a screen used
P address of
numerical (non
access point
uses on the
IP address.
5-11
network
access
Advertisement
Table of Contents
