Table of Contents
Advertisement
2. Configure the
SNMP v1/v2c Trap Configuration
modify the following:
Add
Delete
Destination IP
Port
Community
Add
Click
to create a new SNMP v1/v2c Trap Configuration entry.
Delete
Click
to remove a selected SNMP v1/v2c Trap
Configuration entry.
numerical (non DNS name)
Specify a
receiving the traps sent by the
Specify a destination User Datagram Protocol (UDP) port for
receiving traps. The default is 162.
Enter a community name specific to the SNMP-capable client that
receives the traps.
System Configuration
field (if SNMP v1/v2c Traps are used) to
destination IP address for
access point
SNMP agent.
4-29
Advertisement
Table of Contents
