Table of Contents
Advertisement
6-44
AP-51xx Access Point Product Reference Guide
Inbound SPI (Hex)
Outbound SPI (Hex)
The Inbound and Outbound SPI settings are required to be interpolated to function correctly.
For example:
AP1 Inbound SPI = 800
AP1 Outbound SPI = 801
AP2 Inbound SPI = 801
AP2 Outbound SPI = 800
4. Click
Ok
to return to the VPN screen. Click Apply to retain the settings made on the
Key Settings
5. Click
Cancel
Manual Key Settings
6.11.2 Configuring Auto Key Settings
The access point's Network Management System can automatically set encryption and
authentication keys for VPN access. Use the
encryption and authentication, without specifying the keys. To manually specify keys, cancel out of
the
Auto Key Settings
within the
Manual Key Setting
To configure auto key settings for the access point:
1. Select
Network Configuration
2. Refer to the
and click the
Define an up to six-character (maximum) hexadecimal value to
identify the inbound security association created by the encryption
algorithm. The value must match the corresponding outbound SPI
value configured on the remote security gateway.
Enter an up to six (maximum) hexadecimal value to identify the
outbound security association created by the encryption algorithm.
The value must match the corresponding inbound SPI value
configured on the remote security gateway.
screen.
to return to the VPN screen without retaining the changes made to the
screen.
screen, select the
Manual Key Exchange
screen.
->
VPN Tunnel Config
field, select the
Auto Key Settings
button.
Auto Key Settings
screen to specify the type of
WAN
->
VPN
from the access point menu tree.
Auto (IKE) Key Exchange
Manual
radio button, and set the keys
radio button
Advertisement
Table of Contents
