Table of Contents
Advertisement
5-24
AP-51xx Access Point Product Reference Guide
5.2.1.1 Configuring Port Forwarding
Use the
Port Forwarding
the associated WAN IP address.
To configure port forwarding for the access point:
1. Select
Network Configuration
2. Select
1 to 1
3. Click on the
4. Configure the
Add
Delete
Name
screen to configure port forwarding parameters for inbound traffic from
->
or
1 to Many
from the NAT Type drop-down menu.
Port Forwarding
button within the
Port Forwarding
screen to modify the following:
Click
Add
to create a local map that includes the name, transport
protocol, start port, end port, IP address and Translation Port for
incoming packets.
Click
Delete
to remove a selected local map entry.
Enter a name for the service being forwarded. The name can be any
alphanumeric string and is used for identification of the service.
WAN
->
NAT
from the access point menu tree.
Inbound Mappings
area.
Advertisement
Table of Contents
