Table of Contents
Advertisement
AP51xx>admin(system)>set
Description:
Sets access point system parameters.
Syntax:
?
set name
<name>
loc
<loc>
email
<email>
cc
<code>
Example:
admin(system)>show
system name
system location
admin email address
system uptime
access point firmware version
country code
For information on configuring System Settings using the applet (GUI), see
Appendix A for information on the two-character country codes.
Sets the access point system name to <name> (1 to 59 characters). The access
point does not allow intermediate space characters between characters within
the system name. For example, "AP51xx sales" must be changed to
"AP51xxsales" to be a valid system name.
Sets the access point system location to <loc> (1 to 59 characters).
Sets the access point admin email address to <email> (1 to 59 characters).
Sets the access point country code using two-letters <code>.
: AP51xx
: San Jose Engineering
: SJSharkey@symbol.com
: 0 days 4 hours 33 minutes
: 1.1.0.0-30D
: us
Configuring System Settings on page
Command Line Interface Reference 8-139
4-2. Refer to
Advertisement
Table of Contents
