Symbol AP-51xx Product Reference Manual page 469

AP51xx>admin(system.access)>set
Description:
Defines the permissions to access the access point applet, CLI, SNMP as well as defining their timeout values.
Syntax:
set applet
app-timeout <minutes>
cli
ssh
auth-timout <seconds>
inactive- <minutes>
timeout
snmp
admin-auth local/
RADIUS
server <ip>
port <port#>
secret <pw>
For information on configuring access point access settings using the applet (GUI), see
Defines the applet HTTP/HTTPS access parameters.
Sets the applet timeout. Default is 300 Mins.
Defines CLI Telnet access parameters.
Sets the CLI SSH access parameters.
Disables the radio interface if no data activity is detected after the interval
defined. Default is 120 seconds.
Inactivity interval resulting in the AP terminating its connection.
Default is 120 minutes.
Sets SNMP access parameters.
Designates a Radius server is used in the authentication verification.
Specifies the IP address the Remote Dial-In User Service (RADIUS) server.
Specifies the port on which the RADIUS server is listening. Default is 1812.
Defines the shared secret password for RADIUS server authentication.
Command Line Interface Reference 8-143
Configuring Data Access on page 4-6.