Symbol AP-51xx Product Reference Manual page 147

LAN Name
Ethernet Port
Enable 802.1q
Trunking
VLAN Name
WLAN Mapping
3. Refer to the LAN Ethernet Timeout
processed by the access point.
Use the Ethernet Port Timeout
inactivity for the LAN assigned to the Ethernet port. When
point uses the value defined in the
allows the LAN to use the Ethernet port for an indefinite timeout period.
4. Refer to the 802.1x Port Authentication
point's LAN port.
The access point only supports 802.1x authentication over its LAN port. The access point
behaves as an 802.1x supplicant to authenticate to a server on the network. If using 802.1x
authentication, enter the authentication server user name and password. The default
password is "symbol." For information on enabling and configuring authentication schemes
on the access point, see
Use the LAN Name field to modify the existing name of LAN1 and
LAN2. LAN1 and LAN2 are the default names assigned to the LANs
until modified by the user.
The Ethernet Port radio buttons allow you to select one of the two
available LANs as the LAN actively transmitting over the access
point's LAN port. Both LANs can be active at any given time, but
only one can transmit over the access point physical LAN
connection, thus the selected LAN has priority.
Select the Enable 802.1q Trunking
to conduct VLAN tagging. If selected, click the
button to configure mappings between individual WLANs and
LANs. If enabled, the access point is required to be connected to a
trunked port.
Click the VLAN Name button to launch the
to create VLANs and assign them VLAN IDs. For more information,
see Configuring VLAN Support on page
Click the WLAN Mapping
Configuration screen to map existing WLANs to one of the two
LANs and define the WLAN's VLAN membership (up to 16
mappings are possible per access point). For more information, see
Configuring VLAN Support on page
field to define how LAN Ethernet inactivity is
drop-down menu to define how the access point interprets
Sec. box (default is 30 seconds). Selecting
field if using port authentication over the access
Enabling Authentication and Encryption Schemes on page
checkbox to enable the
WLAN Mapping
VLAN Name
5-5.
button to launch the VLAN
5-5.
Enabled is selected, the access
5-3
Network Management
LAN
screen
Disabled
6-5.