Table of Contents
Advertisement
24. The IT Team leaves each radio's
This ensures as client bridges are added to the growing mesh network that they can be
accounted for.
25. For both AP3 and AP4, the IT Team uses the
assign the
"trion
mesh" WLAN to radio 1. This is the WLAN the AP3 and AP4 radios will
use to interoperate with the MUs populating the shipping yard.
26. As with AP1 and AP2, the IT Team decides to not select the
AP3 and AP4 WLAP Client Bridge Settings field.
27. The Trion IT Team clicks
complete the mesh network configuration of each AP3 and AP4 radio.
For the next 9 months, the Trion Enterprises' mesh network consists of AP1 and AP2 and now
AP3 and AP4 extending the mesh coverage range further into the shipping yard. AP1 is still
the root bridge in the mesh network. The IT Team will appraise their mesh requirements in
another 9 months and (if necessary) add additional access points and MUs to the mesh
network.
For an additional mesh configuration example, see
Example on page
9-4.
Max # Client Bridge
Mesh Network Name
Apply
within both the AP3 and AP4 Radio Configuration screens to
Configuring Mesh Networking
setting at the default setting of 12.
drop-down menu to
Advanced
button within the
Client Bridge Configuration Process
9-37
Advertisement
Table of Contents
