Blacklist Configurations; Figure 34: Blacklist Configuration Parameters - Grandstream Networks UCM6510 User Manual

BLACKLIST CONFIGURATIONS

In the UCM6510, Blacklist is supported for all inbound routes. Users could enable the Blacklist feature,
manage the Blacklist by clicking on "Blacklist".
Firmware Version 1.0.0.5

Voicemail

Conference Room

Call Queue

Ring Group

Paging/Intercom

Voicemail Group

Fax

DISA

IVR

By DID
When "By DID" is used, the UCM6510 will look for the destination
based on the number dialed, which could be local extensions,
conference, call queue, ring group, paging/intercom group, IVR,
voicemail groups and Fax extension as configured in "DID
destination". If the dialed number matches the DID pattern, the call
will be allowed to go through.
Configure the number of digits to be stripped in "Strip" option.

Dial By Name

Figure 34: Blacklist Configuration Parameters

UCM6510 IP PBX User Manual Page 96 of 192