Recalling A Preset - Extron electronics HDXP Plus Series User Manual

4. Press and release the Enter button. The current configuration is now stored in the
selected memory location.
Press the Enter button to
save the preset.
C O N T R O L
VIEW ESC
ENTER PRESET
The Enter and Preset buttons
become unlit or return to
background illumination.
Figure 46. Press the Enter Button

Recalling a preset

Follow these steps to recall a preset (set of ties) to be the current configuration. The steps
below show the front panel indications that result from your action.
NOTE: The illustrations for this procedure show the HDXP 3216. However, the
information applies to all HDXP models.
1. Press and release the Esc
>
Press the Esc to clear all selections.
CONTROL
VIEW ESC
ENTER PRESET
The button blinks once.
Figure 47. Clear All Selections
2. Press and release the Preset button.
Press and release the Preset button.
The Preset button lights.
PRESET
All input buttons with
assigned presets light red.
Figure 48. Entering Recall Preset Mode
In the example in figure 48, the Input 2 button lights red, because a preset has been
assigned to it. Input button 17 does not light, because no preset has been assigned
to it.
All input buttons become unlit or
return to background illumination.
>
button.
Red
(Preset Assigned)
1 1 2 2
Inputs
17 18
17 18
Unlit
(No Preset Assigned)
HDXP Plus Series Switchers • Operation 31