I/O Buttons - Extron electronics HDXP Plus Series User Manual

f
<
View
secondary (
Places the switcher in view-only mode to display the current configuration.
❏
NOTE: View-only mode also provides a way to mute and unmute outputs
Indicates that the HDXP is in view-Only mode.
❏
In I/O grouping mode, selects group 3 (see
•
In I/O grouping mode, indicates that group 3 is selected (see
•
Selects the RS-232 or RS-422 protocol and baud rate (see
•
RS-232 or RS-422 Protocol and Baud Rate
g
>
Esc
secondary (
Cancels operations or selections in progress and reset the front panel button
❏
indicators.
NOTE: The Esc
Flashes once to indicate that the escape function has been activated.
❏
In I/O grouping mode, selects group 4 (see
•
In I/O grouping mode, indicates that group 4 is selected (see
•
Selects the RS-232 or RS-422 protocol and baud rate (see
•
RS-232 or RS-422 Protocol and Baud

I/O Buttons

You must select the input-output connection mode when you are creating or viewing a
configuration. This is done with the Matrix (
h
Matrix button — The Matrix button has two primary functions (
secondary functions (
Places the HDXP in Matrix switching mode, enabling any input to be switched to
❏
any output.
Lights green to indicate that the HDXP is in matrix switching mode, and that any
❏
input can be selected for switching to any output.
With the Preview button, toggles the front panel lock on or off (see
•
Front Panel (Executive Mode)
With the Preview button, initiates the front panel system reset (see
•
using front panel buttons
Selects RS-232 for the rear panel RS232/RS422 port, when the HDXP is in Serial
•
Port Configuration mode (see
Baud Rate
Flashes to indicate that the Remote RS232/RS422 port is set to the RS-232
•
protocol when the switcher is in Serial Port Configuration mode (see
the RS-232 or RS-422 Protocol and Baud
<
button — The View
button has two primary functions (
) functions:
•
(see Muting and Unmuting
>
button — The Esc button has two primary functions (
) functions:
•
>
button does not reset the current configuration or any
presets.
):
•
on page 38).
on page 36).
Outputs) on page 33).
I/O Grouping
on page 36).
I/O Grouping).
Rate).
h ) and Preview ( s ) buttons.
on page 35).
Selecting the RS-232 or RS-422 Protocol and
Rate).
HDXP Plus Series Switchers • Operation
) and eight
❏
VIEW
<
on page 26).
I/O Grouping).
Selecting the
) and five
❏
ESC
>
I/O Grouping).
Selecting the
) and four
❏
Locking the
Resetting
Selecting
16