Firmware Upgrade Page - Extron electronics HDXP Plus Series User Manual

Firmware Upgrade Page

The Firmware Upgrade page provides a way to replace the firmware that is coded on
the HDXP control board without needing to take the switcher out of service. Access the
Firmware Upgrade page by clicking the
page.
Figure 102.
NOTE: The Firmware Upgrade page is only for replacing the firmware that controls
all switcher operation. To insert your own HTML pages, see
Management Page
Update the HDXP firmware as follows:
1. Go to the Extron website, www.extron.com, and download the latest firmware file to
your computer.
a.
On the Extron web page, select the
b. On the Download Center page, click the
c. Scroll to locate the name of your HDXP switcher and click its
d. On the next screen, fill in the required information, then click the
product name_firmware version.exe
e.
On the File Download - Security Warning window, click
f. On the Save As window, browse to the folder where you want to save the
firmware file, and click
drive.
2. Access the HDXP web pages.
3. Select the
4. On the Configuration page, click the
5. Click the
Firmware Upgrade Page
on page 107.
. The firmware installation file is placed on your hard
Save
tab.
Configuration
button. An Open window is displayed.
Choose File
HDXP Plus Series Switchers • HTML Configuration and Control
Upgrade link on the System Settings
Firmware
Using the File
tab.
Download
link on the left sidebar menu.
Firmware
button.
Save
link on the left sidebar menu.
Firmware Upgrade
link.
Download
Download
.
105