Table of Contents
Advertisement
3.
Press and release the Input 5 button.
Press and release the Input 5 button.
The button lights green.
1
2
3
4
5
17 18 19 20 21 22 23 24
Figure 14.
Selecting Input 5
4.
Press and release the Output 3, Output 4, and Output 8 buttons.
Press and release the Output 3, Output 4, and Output 8 buttons.
The buttons blink green to indicate that the selected input will be
tied to these outputs.
1
2
3
4
5
= Blinking Button
Figure 15.
Selecting the Outputs
NOTE: The entire set of ties can be canceled at this point by pressing and
>
releasing the Esc
5.
Press and release the Enter button.
Press the Enter button to
confirm the configuration
change.
All input and output buttons
become unlit or return to
ENTER
background illumination.
The Enter button
becomes unlit or returns to
background illumination.
Figure 16.
Confirming the Tie
The configuration now is:
Input 5 tied to output 3, output 4, and output 8
Input 5 Tied to
Outputs 3, 4, and 8
Input
5
3
Output
4
8
Figure 17.
Example 1, Final Configuration
INPUTS
6
7
8
6
7
8
ENTER
OUTPUT
The Enter button blinks
green to indicate the need to
confirm the change.
>
button. The Esc
button flashes red once.
HDXP Plus Series Switchers • Operation
CONTROL
VIEW
ESC
PRESET
19
Advertisement
Table of Contents
