Windows Buttons, Menus, And Trash Can; Windows Menus - Extron electronics HDXP Plus Series User Manual

Windows Buttons, Menus, and Trash Can

The buttons, drop-down menus, and trash can icon on the right side of the program
window perform the following functions:
•
Power
be powered on and off via software.
•
Executive
view-only mode functions.
menu — Displays a list of up to 10 rooms. From this list you can select a room
•
Room
to display in the window.
NOTE: A room is a subset of outputs that are logically related to each other, as
determined by the operator. The HDXP switcher supports up to 10 rooms, each
of which can consist of from 1 to 16 outputs.
•
Presets
presets (10 rooms with 10 presets per room). From this list you can select a preset
to display in the window. You can either activate the selected preset by clicking
delete it by clicking
• — Activates the selected preset as the current configuration.
Go
•
Save as
number when prompted to do so.
•
Delete
• — Allows you to save to file any changes made to the displayed configuration.
Take
•
Cancel
•
Trash can
all ties associated with that input or output.

Windows Menus

The menu bar on the Matrix window contains the following pull-down menus.
File menu
The menu contains the following options:
File
•
Save MATRIX settings as
to 132 presets (32 global and 100 room presets), plus the
last active setting (preset #0), to a file. Saved settings include
assigned icons and icon captions.
•
Restore MATRIX settings from
previously saved settings file.
•
Save This-Session's settings
settings as, but you are not able to specify a file name to which it will be saved.
•
Restore Last-session's settings
were saved during the last session. If you saved the changes to the settings from the
previous session the last time you exited the program, the ties from that session are
loaded.
•
Select Printer
•
Print Tie Map
• — Closes the Matrix Switcher Control Program.
Exit
— This button is unavailable for HDXP switchers, because the HDXP cannot
mode — Allows you to lock out front panel operations, except for the
menu — Displays a list of up to 32 global presets and up to 100 room
.
Delete
— Allows the current set of ties to be saved as a preset. Enter the preset
— Removes the selected preset.
— Returns to the previous screen, undoing any changes you have made.
— Drag and drop from an input or output button to the trash can to undo
— Saves a complete set of up
— Selects the target printer that will be used to print tie maps.
— Prints the tie set that is displayed on the screen.
HDXP Plus Series Switchers • Matrix Software
— Loads and activates a
— Performs the same function as Save MATRIX
— Loads the icons and icon captions that
or
Go
84