Extron electronics HDXP Plus Series User Manual page 77

c. Click and proceed to step 4.
OK
Figure 71. Baud Rate Pop-up List
If you selected
• IP [LAN]
If you selected
• Emulate
3. If you selected
IP [LAN]
Figure 72. Address and Password Entry for IP Connection
a. Check the Extron IP Address field in the IP Connection window. The field displays
the last Extron IP address entered.
If the IP address is correct, proceed to step 3b.
•
If the address is not correct, either click in the
•
and enter the IP address or click the scroll down button ( ). Select from
among the recently used addresses, then proceed to step 3b.
NOTE: If your local system administrators have not changed the value, the
factory-specified default address,
field.
b. If your HDXP is password protected, click in the
appropriate administrator or user password.
c. Click .
Connect
If you logged on using the administrator password, the Windows program
•
connects you to the HDXP switcher with all of the administrator rights and
privileges.
If you logged on with the user password, the Matrix program connects you to
•
the HDXP switcher with only user capabilities.
If an incorrect password is entered, the program beeps and returns to the
•
password entry display.
, click and proceed to step 3.
OK
, click and see Using Emulation Mode
OK
in step 2, the IP Connection window opens.
192.168.254.254
Password
HDXP Plus Series Switchers • Matrix Software
on page 89.
field
Extron IP Address
, is the correct value for this
field and enter the
71