Extron electronics HDXP Plus Series User Manual page 68

Command
Information Requests (continued)
View File Directory Commands (continued)
View file directory
web browser
Erase user-supplied web
pages or files
IP Setup Commands
Set matrix name
NOTE: The following characters are invalid or not recommended in the matrix name:
`
~ , @ = [ ] { } ' " ; : | \ and ?
Read matrix name
Reset matrix name to factory
default
Example:
Set time and date
Read time and date
Example:
Set GMT offset
Example:
Read GMT offset
Set Daylight Saving Time
Read Daylight Saving
Time
X2%
NOTE: = Matrix switcher name
X2^
= HDXP time and date (for viewing)
X2(
= Factory default switcher name
X3&
= HDXP time and date (for setting)
X3(
= Greenwich Mean Time (GMT) offset GMT offset (-12.00 to +14.0 hours) represents the time difference in
X4)
= Daylight saving time (DST) status
ASCII Command
(Host to Switcher)
E }
DF
E }
filenameEF
E X2% }
CN
E }
CN
E }
• CN
E }
• CN
E X3& }
CT
E }
CT
E }
CT
E X3( }
CZ
E }
5.30CZ
E }
CZ
E X4) }
CX
E }
CX
Name of the matrix switcher, up to 24 alphanumeric characters or
hyphens (-). The last character cannot be a hyphen.
Day, date, and time in the format Www, DD/Mmm/YYYY HH:MM:SS.
Www = day of week (Mon – Sat), Mmm = month (Jan – Dec), DD = day
of month (01 – 31), YYYY = year (20nn), HH = hour (00 – 24),
MM = minutes (00 – 59), SS = seconds (00 – 59)
Consists of a combination of the model name and the last three pairs
of the switcher MAC address.
Time and date in the format MM/DD/YY HH:MM:SS
hours and minutes (± hh.mm relative to Greenwich, England). The
plus sign and leading zero are optional.
0 = off, 1 = off. Daylight saving time (DST) is a 1-hour offset that is
observed in the USA and parts of Europe and Brazil.
HDXP Plus Series Switchers • Remote Configuration and Control
Response
Additional Description
(Switcher to Host)
Var file = new array ();
File [1] = 'filename1,date1,filesize1';
File [2] = 'filename2,date2,filesize2';
File [3] = 'filename3,date3,filesize3';
...
File [n] = 'filenamen,daten,filesizen';
File [n+1] = {space remaining} bytes • left
List user-loaded files.
]
Del • filename
X2% ]
Change the switcher name to
Ipn •
X2%
X2%]
View switcher name
X2(] Reset the name of the HDXP
Ipn •
to factory default
Ipn • HDXP-Plus-Series-00-2E-C7
X3& ] Set the HDXP time and date
Ipt
to
X2^ ] View HDXP day, date, and
time
Mon, 08 May 2013 19:01:17
X3( ] Set the Greenwich Mean Time
Ipz
(GMT) offset value (
location of the HDXP.
]
Ipz+05:30
X3( ]
View GMT offset
HDXP.
X4) ]
Enable or disable daylight
Ipx
saving time (
X4) ] View the DST status on the
HDXP.
.
X2%
.
X2(
.
]
X3&
.
X2^
.
]
X3(
) for the
X3(
for the
X4)
).
62