Default Settings - Polycom SpectraLink 8020 User Manual

User Guide: SpectraLink 8020/8030 Wireless Telephone with SIP
Setting/profile
Ring Cadence
Ring Tone
Ring Volume
Vibrate Cadence
Ring Delay
Noise Mode
Headset/Speaker
Key Tones
Warning Tones
Push-to-talk *
PTT Vibrate †
Emergency Dial ‡
* Push-to-talk must be enabled by the system administrator before it can be activated by the user. If it is not enabled, then it will not
appear on the Config menu and will not be "On" for any profile.
† PTT Vibrate is available only when Push-to-talk has been enabled by the system administrator.
‡ Emergency Dial must be enabled by the system administrator. If enabled, it will be "On" (or available for use) in every profile.
28

Default settings

The profile options on the Config menu may be reset to their default
values by the system administrator. These are the default settings:
Silent Vibrate
Off Off
Tone 1 Tone 1
1 1
Off PBX
0 0
Normal Normal
Speaker Speaker
Off Off
Off Off
Off Off
Disabled Disabled
On On
Soft Loud
PBX PBX
Tone 1 Tone 1
3 7
Off Off
0 0
Normal Normal
Speaker Speaker
On On
Off Off
On On
Disabled Disabled
On On
Custom
PBX
Tone 1
5
PBX
5
Normal
Speaker
On
Off
On
Disabled
On
1725-36165-001-E.doc