Motorola WS5100 Series Cli Reference Manual page 351

Source MAC Address
Destination MAC Address
dot1p<0-7>
rule-precedence<1-5000>
type(<1-
65535>|arp|ip|ipv6|vlan|wisp)
vlan<1-4095>
Usage Guidelines
Use the mark option to specify the type of service (tos) and priority value. The tos value is
marked in the IP header and the 802.1p priority value is marked in the dot1q frame.
Whenever the interface receives the packet, its content is checked against all the ACEs
in the ACL. It is marked based on the ACL's configuration.
Example
The example below marks the dot1p priority value to 6 for all 802.1q tagged traffic from
VLAN interface 5
Extended MAC ACL Instance
Specifies the bits to match. The source wildcard can
be any one of the following:
•
xx:xx:xx:xx:xx:xx/
xx:xx:xx:xx:xx:xx
and mask
• any – Any source host
• host Exact source MAC address to match
–
Specifies the bits to match. The destination
wildcard can be any one of the following:
•
xx:xx:xx:xx:xx:xx/
xx:xx:xx:xx:xx:xx
address and mask
• any – Any destination host
• host Exact destination MAC address to
–
match
Defines a VLAN 802.1p priority value to match
Establishes an access-list entry precedence
Defines an ethertype value represented as an
integer or keyword for well-known ethertypes (like
IP, IPv6, ARP etc.)
Defines the VLAN tag ID to match
16-7
–Source MAC address
–Destination MAC