Motorola WS5100 Series Cli Reference Manual page 457

Parameters
interference-avoidance
enable
hold-time<0-65535>
retries<0.0-15.0>
neighbor-recovery
action
(both|none|open-rates|
raise-power)
radio (<1-1000>|RADIO)
enable
neighbors<1-1000>
(<1-1000>|RADIO)
run-neighbor-detect
Interference avoidance configuration.
Enables/disables interference avoidance
The number of seconds to disable interference avoidance
after a detection. This prevents a radio from changing
channels continuously. Set the hold-time between 0-65535
seconds
Defines the average number retries to cause a radio to
re-run auto channel selection. Set between 0-15
Invokes neighbor recovery configuration commands
Defines the radio's self healing action when neighbors are
detected as down
• both – Raises the power to max and open all rates
• none – No action taken
• open-rates – Opens all rates
• raise-power – Raises the power to maximum
• radio – Modifies the action for specified radio(s)
• <1-1000> – Sets a single radio index
• RADIO – Defines a list (1,3,7) or range (3-7) of radio
indices
Monitors access ports and attempts to increase coverage
on a detected failure
Adds a radio as a neighbor
Disassociates all mobile units, clears current neighbors and
runs neighbor detection
Wireless Instance 20-39