Redundancy - Motorola WS5100 Series Cli Reference Manual

5-42 WS5100 Series Switch CLI Reference Guide
0
2
LINE
local
retransmit
<0-100>
timeout
<1-1000>
Usage Guidelines
The RADIUS server host is used to configure RADIUS server details. These details are
required for management user authentication if AAA authentication has been defined as
RADIUS
Example
WS5100(config)#radius-server local
WS5100(config-radsrv)#

5.1.27 redundancy

Global Configuration Commands
Configures redundancy group parameters
Syntax
redundancy [auto-revert (enable)|auto-revert-period <1-1800>|dhcp-
server (enable)|discovery-period <10-60>|enable|
group-id <1-65535>|handle-stp (enable)|heartbeat-period <1-255>|
hold-period <10-255>|interface-ip <IP Address>|
manual-revert|member-ip <IP address>|mode (primary|standby)]
Parameters
auto-revert (enable)
Password is specified UNENCRYPTED
Password is encrypted with password-encryption secret
Text of shared key, upto 127 characters
Configures local RADIUS server parameters.This takes you
to a new
config-radius-server
Server Instance for more details
Specifies the number of retries to active server
Number of retries for a transaction (default is 3)
Time to wait for a RADIUS server to reply
Wait time (default 5 seconds)
Enables auto-revert
context. Refer Radius