Motorola WS5100 Series Cli Reference Manual page 454

20-36 WS5100 Series Switch CLI Reference Guide
tag_type
[aeroscout|cricket|newb
ury] (listen-addr)
<MAC address>
wmm(background|best-
effort|video|voice)
(aifsn<1-15>|burst<0-
65535>| cw<0-15>)
wmm(video|voice)
(acm [enable|max-mus
<1-64>]
Configures the WI-FI tag type.
• aeroscout – Aeroscout active tag
• cricket – Cricket (Motorola) Active tag
• newbury – Newbury active tag
• listen-addr – Configures a multicast listening
address for active tags
• AA-BB-CC-DD-EE-FF – Sets a multicast MAC
address
NOTE: For Aeroscout tags, the address is configurable.
Unless the address is configured on the radio, the tag
packet will not be forwarded to the switch from the AP
Sets 802.11e/Wireless Multi Media (WMM) parameters
(supported only on AP300)
radio wmm(background|best-effort|video|voice)(aifsn<1-
15>|burst<0-65535>|cw<0-15>)
<1-64>]
• background – Prioritizes Background category traffic
• best-effort– Prioritizes Best Effort category traffic
• video – Prioritizes Video category traffic
• voice – Prioritizes Voice category traffic
• acm (enable|max-mus <1-64>)– Admission control
parameters. Use
enable
control.Enabling ACM on video enables ACM on the
Voice access category
Use to specify the number of mobile units that
max-mus
are allowed access on the specified categories
• aifsn<1-15> – (Arbitration Inter Frame Spacing Number)
Defines the wait time (in milliSeconds) between data
frames. Derived using AIFSN and the slot-time
(acm [enable|max-mus
to allow admission