Motorola WS5100 Series Cli Reference Manual page 462

20-44 WS5100 Series Switch CLI Reference Guide
enhanced-beacon-table
[channel-set (a|bg) <1-
200> | enable | erase-
report | max-ap <0-512> |
scan-interval <10-60> |
scan-time <100-1000>]
Configures an AP for detecting and locating other APs in the
network
• channel-set (a|bg) <1-200> – 802.11a / 802.11bg
channel-set settings used for AP locationing
• (a|bg) – Adds channels to the Enhanced
Beacon Table for 802.11a/bg. A seperate
channel set can be configured for "a" and
"bg" radios
• <1-200> – List of space separated channel
number(s) between 1 and 200
• enable – Enables or disables the gathering of
information for AP locationing
• erase-report – Erases AP beacon locationing reports
captured by the switch
• max-ap <0-512> – Sets the maximum number of APs
allowed in the AP locationing table
• scan-interval <10-60> – Defines the duration between
two scans (in seconds)
• scan-time <100-1000> – The time the radio dwells on
each channel in the a/bg channel-set (in milli seconds)