Motorola WS5100 Series Cli Reference Manual page 294

12-12 WS5100 Series Switch CLI Reference Guide
12.1.14 show
Interface Config Commands
Displays current system information running on the switch
Syntax
show <parameter>
Parameters
?
Example
WS5100(config-if)#show ?
access-list
aclstats
alarm-log
autoinstall
banner
boot
clock
commands
crypto
debugging
dhcp
environment
file
ftp
history
interfaces
ip
ldap
licenses
logging
mac
mac-address-table
management
mobility
ntp
password-encryption
port-channel
privilege
radius
redundancy-group
Displays the parameters for which information can be
viewed using the show command
Internet Protocol (IP)
Show ACL Statistics information
Display all alarms currently in the system
autoinstall configuration
Display Message of the Day Login banner
Display boot configuration.
Display system clock
Show command lists
encryption module
Debugging information outputs
DHCP Server Configuration
show environmental information
Display filesystem information
Display FTP Server configuration
Display the session command history
Interface status
Internet Protocol (IP)
LDAP server
Show any installed licenses
Show logging configuration and buffer
Internet Protocol (IP)
Display MAC address table
Display L3 Managment Interface name
Display Mobility parameters
Network time protocol
password encryption
Portchannel commands
Show current privilege level
RADIUS configuration commands
Display redundancy group parameters