Motorola WS5100 Series Cli Reference Manual page 171

Parameters
access-list
(<1-99>|<1300-1999>)
(deny|permit|mark
(8021p <0-7> |
tos <0-255>))
(A.B.C.D/M | host A.B.C.D |
any)(log)
(rule-precedence <1-
5000>)
Adds a standard access list entry.
• (<1-99>|<1300-1999>) – Defines access numbers from
1 to 99 or 1300 to 1999
• (deny|permit|mark) – Defines action types on an ACL.
The action type
• 8021p <0-7> – Used only with the action type
specify 8021p priority values
• tos <0-255> – Used only with the action type
specify type of service (tos) values
• (A.B.C.D/M | host A.B.C.D | any) – Source is the source
address of the network or host in dotted decimal.
Source-mask is the network mask. For example,
10.1.1.10/24 indicates the first 24 bits of the source IP
are used for matching
• The keyword any is an abbreviation for a source IP of
0.0.0.0 and source-mask bits equal to 0
• The keyword host is an abbreviation for exact source
(A.B.C.D) and source-mask bits equal to 32
• log – Generates log messages when the packet coming
from the interface matches the ACL entry. Log
messages are generated only for router ACL's
• (rule-precedence <1-5000>) – Define an Integer value
between 1-5000. This value sets the rule precedence in
the ACL
Global Configuration Commands
is functional only over a Port ACL
mark
5-7
to
mark
to
mark