Clrscr; Convert-Ap - Motorola WS5100 Series Cli Reference Manual

20-14 WS5100 Series Switch CLI Reference Guide
Example
WS5100(config-wireless-client-list)#wlan 1
WS5100(config-wireless-client-list)#

20.1.11 clrscr

Wireless Configuration Commands
Clears the display screen
Syntax
clrscr
Parameters
None
Example
WS5100(config-wireless)#clrscr
WS5100(config-wireless)#

20.1.12 convert-ap

Wireless Configuration Commands
Changes the mode of operation of an AP to either sensor or standalone
Syntax
convert-ap <1-48>(default|sensor|standalone)
Parameters
<1-48>
default
sensor
Sets the indices of the APs to be converted (from the ['show
wireless ap' command])
Does not force conversion. Lets the AP negotiate its normal
mode of operation with the switch
Converts an AP300 to operate as an IDS sensor.
Note: The switch will not be able to adopt this AP again
until it is converted back to a AP300 using the
[
sensor <1-256> revert-to-ap
] command