3.1.6 logout
User Exec Commands
Use this command instead of the
Syntax
logout
Parameters
None
Example
The WS5100 Series Switch logs off on execution of this command.
3.1.7 page
User Exec Commands
Use the page command to toggle the switch paging function. Enabling this command
displays the CLI command output page by page, instead of running the entire output at
once.
Syntax
page
Parameters
None
3.1.8 ping
User Exec Commands
Sends ICMP echo messages to a user-specified location
Syntax
ping [IP address|hostname]
Parameters
[IP address|hostname]
Example
WS5100>ping 192.168.2.100
PING 192.168.2.100 (192.168.2.100): 100 data bytes
command to exit the EXEC mode
exit
Pings the specified destination address or hostname
User Exec Commands
3-7