Debug - Motorola WS5100 Series Cli Reference Manual

4-12 WS5100 Series Switch CLI Reference Guide
Parameters
FILE
URL
Example
Transferring file snmpd.log to remote tftp server?
WS5100#copy flash:/log/snmpd.log
tftp://157.235.208.105:/snmpd.log
Accessing running-config file from remote tftp server into switchrunning-config?
WS5100#copy tftp://157.235.208.105:/running-
config running-config

4.1.10 debug

Priv Exec Command
Use this command for debugging. This command is also used for debugging
Syntax
debug all
debug cc [access-port|all|alt|ap-detect|capwap|cluster|
debug ccstats <CCStats Module>
debug certmgr [all|error|info]
debug dhcpsvr [all|error|info]
debug imi [all|cli-client|cli-server|errors|init|ntp]
debug ip [https|ssh]
debug logging [all|errors|monitor|subagent]
debug mgmt [all|cgi|err|sys]
debug mobility [all|cc|error|forwarding|mu|packet|peer|system]
debug mstp [all|cli|packet|protocol|timer]
debug nsm [all|events|kernel|packet]
debug pktdrvr [rate-limit|skip-packet-filter]
debug radius [all|err|info|warn]
debug redundancy [all|ccmsg|config|errors|general|heartbeats|
debug securitymgr [all|debug|error|ikeerror|pmdebug|pmerror]
debug sole [adapters|algo|all|errors|init]
Target file from which to copy
Target URL from which to copy
config|dot11|eap|ids|kerberos|l3-mob|loc-ap|
loc-mu|media|mobile-unit|radio|radius|self-
heal|snmp|system|wips|wisp|wlan]
init|packets|proc|shutdown|states|subagent|timer|
warnings]