Cluster-Cli; Debug - Motorola WS5100 Series Cli Reference Manual

3-4 WS5100 Series Switch CLI Reference Guide

3.1.2 cluster-cli

User Exec Commands
Use this command to enter the cluster-cli context. The cluster-cli context provides
centralized management to configure all cluster members from any one member. Any
command executed under this context will be executed to all the switches in the cluster.
A new context (redundancy) supports the cluster-cli. Any commands executed under this
context are executed to all members of the cluster.
Syntax
cluster-cli enable
Parameters
enable
Example
WS5100>cluster-cli enable
WS5100>

3.1.3 debug

User Exec Commands
Use this command to debug the switch
Syntax
debug (certmgr(all|err|info)|ip (https|ssh)|
mobility(cc|error|forwarding|mu|packet|peer|system))
Parameters
certmgr
Enables the cluster context.
Certificate Manager Debugging Messages
• all – Traces error and informational
messages from the certificate manager
• error – Traces error messages from the
certificate manager
• info – Traces informational messages from
the certificate manager