Hostname; Interface - Motorola WS5100 Series Cli Reference Manual

5-26 WS5100 Series Switch CLI Reference Guide
Example
WS5100(config)#ftp enable
WS5100(config)#

5.1.14 hostname

Global Configuration Commands
Changes the system's network name
Syntax
hostname(WORD)
Parameters
WORD
Example
WS5100(config)#hostname Eldorado
Eldorado(config)#

5.1.15 interface

Global Configuration Commands
Configures a selected interface. This command is used to enter the interface configuration
mode for the specified physical Switch Virtual Interface (SVI) interface. If the VLANx (SVI)
interface does not exist, it is automatically created
Syntax
interface(IFNAME|eth <1-2>|vlan <1-4094>)
Parameters
IFNAME
eth <1-2>
Provide the name for the systems network
NOTE: The interface mode leads to the
details see interface Instance on page 12-1. The prompt changes from
ws5100(config) #
Defines the interface name
Defines the Ethernet interface
config-if
to
ws5100(config-if)
instance. For more